Yearndoll washing kit for sex dolls only lower body cleaning, disinfection, and drying Item NO.: 3995818

Video Showing

Product Information:

• Product Name: Love Doll Cleaning Kit
• Model Specification: LLD-G 001
• Package Contents: 1 automatic cleanser, 1 power-on sterilization rod, 2 suction rods, instruction manual, charging cable, suction hose. Does not include drugs or cleaning solutions, provided non-sterile.
• Scope of Application: For post-use vaginal cleaning and disinfection of love dolls.
• User: Love doll owners
• Product Functions:Before use, insert the rotating rod into the cleanser's main body, aligning it with the corresponding notches. To remove, pull it out vertically after use.
• 1.Press the button on the product for 2 seconds to turn on the power. If the power indicator blinks after turning on, it indicates low power. Charge the product before use.
• 2.During charging, attach the magnetic end of the charging cable to the two metal points on the product handle. Insert the USB end into a mobile phone charger. Charging voltage: 5V, current: 500mA, battery capacity: 1200mAh, battery voltage: 3.7V. Takes about 3 hours to fully charge.
• 3.Once charged, the product can stand by for 8 months and be used approximately 50 times. Due to low charging frequency, store the charging cable properly.
• 4.Discontinue use if the button is damaged or water ingress occurs.
• 5.If not used after turning on the power, it will automatically turn off after 3 minutes.
• 6.If the water temperature exceeds 40 degrees, the water temperature lamp will change from a blue signal to a red signal. Due to a delay in temperature display, use the perceived temperature as a reference.
• 7.Press the cleaning button to start the timer. A red signal will be displayed within 1 minute, changing to a green signal after more than 1 minute of cleaning. It will automatically stop after 1 minute of cleaning.
• 8.Pressing the button under the product for the first time activates the lifting cleaning mode. Pressing it a second time turns on the rotation function, automatically stopping after a total of 65 seconds. Pressing it a third time stops both the lifting and rotation functions.
• 9.Long-pressing the button under the product activates manual mode. The product will keep operating until the button is released. (When the power is turned on and no water is suctioned, the noise is loud; after water suction, the noise is small.)
• 10.Before using the sterilization rod, prepare a (Type-C) mobile phone charging cable. The USB end can be connected to a mobile power bank or mobile phone, inputting a voltage of 5V.
• 11.First, insert the glass part of the sterilization lamp into the love doll's vagina. Then, turn on the power to the sterilization lamp. The sterilization lamp will directly light up and begin sterilization.
• 12.The sterilization lamp uses ultraviolet light for disinfection, achieving the sterilization effect 30 minutes after turning on the sterilization lamp.
• 13.Using the sterilization lamp generates a temperature of around 40 degrees inside the love doll's vagina. After sterilization is complete, there are no side effects when immediately using the love doll.
• 14.After sterilization is complete, turn off the power and remove the sterilization rod from the vagina.
• 15.After sterilization, use the suction rod to remove excess moisture from the vagina.
• 16.The suction rod can be reused. If reused, remove the water-absorbed suction rod and let it dry naturally.
• Prohibitions, Precautions, Warnings, and Advisory Information:
• 1.All products within this set are strictly prohibited for use on the human body.
• 2.In the case of vaginal dryness, please use personal lubricants; failure to do so may result in the inability to rotate.
• 3.When using, please use potable water. (Bottled pure water or warm water is ideal.) If the product sucks in foreign objects, it may malfunction, and malfunctions caused by the ingestion of foreign objects are not guaranteed. (Foreign objects may include, but are not limited to, strands of hair, lumps of scale, etc.)
• 4.When in use, bring a water container with a recommended capacity of approximately 1.5 liters.
• 5.The cleaning water temperature should not exceed 40°C. The temperature indication is for reference only; use the perceived temperature as a basis to prevent burns. The maximum temperature resistance of the product pump should not be exceeded, and it is 80°C.
• 6.If any malfunction occurs during the use of the product, immediately cease use and promptly contact customer service or the after-sales service representative.
• 7.Direct exposure of the sterilization lamp to the human body and living organisms is strictly prohibited during use.
• 8.The transparent tube of the sterilization rod is a special glass tube. It is strictly forbidden to strike it. If the glass tube breaks, cease use immediately, as glass fragments can cause bodily harm.
• 9.After use, if water occasionally accumulates in the vagina, inserting the water-absorbing fiber rod will resolve the issue.
• 
  
• Ultraviolet Sterilization Principle:
• 1.Ultraviolet (UV) radiation primarily causes damage to microorganisms (such as bacteria, viruses, spores, and other pathogens) through radiation-induced damage and nucleic acid disruption. This process leads to the destruction of microorganisms, achieving the goal of disinfection. The effects of UV radiation on nucleic acids include bonding and chain rupture, cross-linking, and the formation of photoproducts, thereby altering the biological activity of DNA and preventing the self-replication of microorganisms.
• 2.Experiments have shown that after sterilization, any odor within the love doll's vaginal cavity disappears. The sterilization efficiency of this sterilization rod is confirmed to be above 99.9%. Following sterilization, even if the interior of the love doll's vagina remains moist, no unpleasant odors will occur.